Bench-top Autoclaves

These autoclaves don't just seem to be different; they are different. Specially developed for sterilization applications in the laboratory, processes become easier, safer, more precise, reproducible and validatable.

Back to category page
0

Download Brochure


Systec DX

For all laboratory applications even for sophisticated state-of-the-art sterilization processes. With all possibilities to add additional options for process optimization to enable validatable sterilization to be carried out.

Systec DE

For basic laboratory applications and media sterilization. With limited possibilities to add additional options for process optimization.

Systec DB

For simple process applications. No options available for process optimization.


Innovative automatic safety door lock.


Easy and safe. When the autoclave lid is closed, the lid is automatically locked by a circumferential ring system. A special lip seal made of heat resistant silicone provides reliable sealing. As steam pressure builds within the sterilizer, the seal becomes tighter.

The lid also opens easily – either at the push of a button or automatically at the end of a sterilization cycle.

The door-locking system on this benchtop autoclave, is temperature dependent and adheres to national and international safety standards. The door remains locked as long as there is excess pressure in the chamber. The lid, like other parts of the pressure vessel and housing, is made of stainless steel. The modern design faceplate, which also contains the control panel, display and part of the control technology, is made of heat resistant and insulated plastic. There is no risk of the autoclave operator coming into contact with hot components.

0

0

Tomorrow’s process requirements are addressed in today’s design!


The Systec D-Series benchtop autoclave units are the first of its kind to be designed for higher pressures and temperatures. The standard pressure sterilizer chamber is designed for 5 bar/150 °C. If the expanded pressure and temperature model is selected as an option, all control and safety components are adapted to the higher temperature and pressure. This option may be retrofitted to existing D- series benchtop autoclave units. Systec D-Series benchtop autoclave units are equipped direct from the factory for sterilization temperatures up to 140 °C and 4 bar of pressure.


Controls – new generation. Microprocessor and software


The Systec D-Series benchtop autoclave units have “comprehensive intelligence”: Pressure is controlled via an electronic pressure transducer. Additionally, there is a flexible temperature sensor in the sterilization chamber or in a reference vessel (for liquids) and another sensor at the coldest part of the chamber, the condensate outlet. The microprocessor, specially developed for our laboratory autoclave, controls all relevant functions such as steam pressure, temperature and sterilization time as well as optional rapid cooling, pre / post-vacuum and drying. Menu-presented instructions in easy to read text form.Membrane keyboard with acoustic confirmation signal. Ergonomically located in a logical and easy to operate position.

0

0

Pure innovative Design!


Steam generation! A steam generator is incorporated in the sterilizer housing providing substantial benefits:
  • No heating elements and no reservoir for dirty water in the chamber
  • With stand-by pre-heating option, only 10 min. heating time to 121° C with an empty chamber
  • Improved removal of air from the empty chamber via pulsed heating (rapid attainment of optimal steam atmosphere, even without a vacuum)
  • Accuracy better than ± 0.5 C with empty chamber
  • Quicker cooling as neither hot water in the chamber nor the separate steam generator need be cooled
  • After cooling, steam is immediately available for the next sterilization run.


Further standard features:

  • Flexible temperature sensor PT-100 for a reference vessel
  • Medium temperature triggering of sterilization time
  • Autofill – automatic filling with demineralized water feed for steam generation
  • Start by clock – timer for programming starting time
  • Collecting point for all outlet pipes
  • Venting valve
  • Baseplate in the sterilizer chamber for vessels, baskets etc.
  • Validation port

0

0

Condensation instead of steam removal!


Exhaust steam is condensed automatically via a PT 100-regulated cooling system. This prevents odors and protects waste water piping. Quality materials quality manufacturing! The pressure vessel is made of corrosion-resistant electro-polished stainless steel 1.4571 (V4A) AISI 316 Ti and therefore very easy to clean. The benchtop autoclave framework and housing are also made of stainless steel. The highly efficient, high-quality Hanno-Tect insulation material releases no particles and therefore the Systec V-Series sterilizer is ideal for use in clean room environments.


Technical Data

Type
D-23
D-45
D-65
D-90
D-100
D-150
D-200
Chamber Dimensions in mm
(diameter x depth)
260x420
344x500
400x500
400x700
500x500
500x700
500x1000
Chamber Volume in Liters
23
45
65
90
100
150
200
Technical Drawings
Drawings
Drawings
Drawings
Drawings
Drawings
Drawings
Drawings

Loading Capacity - Erlenmeyer Flasks

Type D-23 D-45 D-65 D-90 D-100 D-150 D-200
250 ml 11 24 23 31 2 x 30 2 x 42 2 x 59
500 ml 8 12 15 21 2 x 15 2 x 24 2 x 40
1000 ml 3 8 9 13 12 18 23
2000 ml - 3 6 8 7 9 14
3000 ml - - 3 4 6 8 11
5000 ml - - - - 3 5 7